Ardex WPM 200 Liquid Waterproof Membrane Grey (Choice Of Size)
Ideal For Under Raised Access Floors, In Plant Rooms And Wet Areas
Provides A Water And Water Vapour Barrier
Suitable For BS 8102 Type A Waterproof Barriers
Chemically Resistant
Excellent Adhesion
Can Be Applied To A Wide Variety Of Substrates Including Concrete, Masonry And Steel
For Use On Vertical And Horizontal Applications
Colour: Grey
Size: Available In 5 Or 20Ltr Bottles
ARDEX WPM 200 has been specifically developed to provide a water and water vapour barrier, or priming layer to concrete, screeded, rendered or masonry surfaces, steel and other vertical as well as horizontal hard surfaces. ARDEX WPM 200 is ideal for use in plant rooms, under raised access floors, ground floor slabs, workshops, marine protection, sewage processing areas, swimming pool surrounds and shower areas. It can be used as a FeRFA Class 2 resin floor finish or sand scatter finished as a reduced slip-wearing surface. A sand-scattered prepared layer of WPM 200 can also be used as a waterproof key for tiling or rendering.
ARDEX WPM 200 is a solvent-free, low-viscosity, two-component, polymer-modified epoxy liquid waterproof membrane. ARDEX WPM 200 is suitable for Type A waterproof barrier protection structures as per BS 8102. After hardening ARDEX WPM 200 produces a membrane with high inherent strength and excellent bond to appropriate substrates, including very damp concrete and screeds. ARDEX WPM 200 accommodates hygrometer readings up to 98% RH and has excellent resistance to water, grease, oil, aqueous salt solution, and spillages of a range of dilute mineral and organic acids and organic liquids and solutions.
Mixing Ratio: Component A: Component B: 4.5:1 by weight.
Density At 20°C: 1.18.
Working Time: 20 minutes at 20°C.
NOTE: Both the working time and viscosity will decrease at higher temperatures, and increase at lower temperatures.
Over Coating: min 8 hours, max 24 hours at 20°C.
Walkability At 20°C: 6-8 hours.
Moisture Vapour Transmission Rate: EN ISO 7783-1 1.6 g/m²/24hr.
Coverage: Approximately 4.8m²/ltr (4m²/kg) e.g. when mixed a 5-litre unit will cover approximately 24m² per coat at 200 microns, and a 20-litre unit will cover approximately 96m² per coat at 200 microns.
Colour: Grey.
Size: Available In 5 Or 20Ltr Bottles.