Mapei MapePave Mortar Pre-Blended Ready To Use Bedding Mortar 25kg Full Pallet (40 Bags Tail Lift)
Full Pallet 40 x 25kg Bags
Ideal For Bedding 20mm Porcelain
Just Mix With Water
Rapid Curing
Thin Application
Low Shrinkage
Used In Conjunction With MapePave Slurry
Coverage: 15 kg/m² Per cm Of Thickness
Size: 25kg Bags
Full Pallet 40 x 25kg Bags
MapePave Mortar is ideal for bedding 20mm porcelain, it is rapid curing (just 12 hours for foot traffic), thin application, has low shrinkage and is compliant with BS 7533.
Pre-blended, just mix with water. To be used in conjunction with MapePave Slurry.
Product Preparation:
Mix a 25 kg bag of MapePave Mortar with 1.55-1.8 litres of water for at least 5 minutes in a cement mixer, automatic pressure pump or truck mixer until a homogeneous mix is obtained. The product can be mixed with a robust paddle mixer with care if required. The mix must be poured, compacted and floated within 40-60 minutes after mixing.
Consistency: Powder.
Colour: Grey.
Bulk Density (Kg/m³): 1,500.
Application Data (at +23°c - 50% R.h.)
Mix Ratio: 1.55 - 1.8 Litres of Water.
Density of the Mix (Kg/m³): 2,100 Depending on Compaction.
Mixing Time: 5 to 10 Mins.
Workability of the Mix: 60 Mins.
Application Temperature Range: From +5°c to +35°c.
Set to Light Foot Traffic: After 12 Hours.
Resistance to Moisture: Excellent.
Resistance to Ageing: Excellent.
Resistance to Solvents and Oils: Excellent.
Resistance to Acids and Alkalis: Poor.
Resistance to Temperature: From -30°c to +90°c.
Flexibility: No.
Storage & Shelf Life: Mapepave Mortar May Be Stored for Up to 12 Months in Its Original Packaging in a Dry Place.