.jpg)
.jpg)
Mapei MapePave Slurry Pre-Blended Ready To Use Bonding Agent 20kg
For the Rapid Installation of Exterior Paving
Ideal for Bonding 20mm Porcelain
Rapid Curing
BS 7533 Compliant
Used in Conjunction With MapePave Mortar
Size: 20kg Bag
Coverage: Approx. 6 sqm Per 20kg
MapePave Slurry is a bonding agent to be used in conjunction with MapePave Mortar for the rapid installation of exterior paving including 20mm porcelain.
Advantages:
- Paving slurry ideal for bonding 20mm porcelain.
- BS 7533 compliant.
- Rapid curing – open to pedestrian traffic in 12 hours.
- Just mix with water.
- Thin application.
- Low shrinkage.
- Used in conjunction with MapePave Mortar.
Preparation of the product: Mix a 20 kg bag of MapePave Slurry with 6.4 litres of water for at least 5 minutes with a Mechanical mixer and paddle. The mix must be applied to the MapePave Mortar fresh on fresh and should also be applied to the rear of the installing paver.
Consistency: Powder.
Colour: Grey.
Bulk Density (Kg/m³): 1,500.
Dry Solids Content (%): 100.
Mix Ratio: 6.2 - 6.4 Litres.
Specific Gravity of the Mix (Kg/m³): 2,100.
Mixing Time: 5 to 10 Mins.
Workability of the Mix: 60 Mins.
Open Time: 10 Mins.
Application Temperature Range: From +5°c to +30°c.
Tensile Strength: >1 N/mm2.
Set to Light Foot Traffic: After 12 Hours.
Resistance to Moisture: Excellent.
Resistance to Ageing: Excellent.
Resistance to Solvents and Oils: Excellent.
Resistance to Temperature: From -30°c to +90°c.
Storage & Shelf Life: Mapepave Slurry May Be Stored for Up to 12 Months in Its Original Packaging in a Dry Place.
Related Products
-
New
![Mapei MapePave Slurry Pre-Blended Ready To Use Bonding Agent 20kg Half Pallet (24 Bags Tail Lift)]()
£420.00 ex VAT£504.00 inc VAT -
New
![Mapei MapePave Slurry Pre-Blended Ready To Use Bonding Agent 20kg Full Pallet (48 Bags Tail Lift)]()
£816.00 ex VAT£979.20 inc VAT
