Mapei MapePave Slurry Pre-Blended Ready To Use Bonding Agent 20kg Full Pallet (48 Bags Tail Lift)
Full Pallet 48 x 20kg Bags
For the Rapid Installation of Exterior Paving
Ideal for Bonding 20mm Porcelain
Rapid Curing
BS 7533 Compliant
Used in Conjunction With MapePave Mortar
Size: 20kg Bag
Coverage: Approx. 6 sqm Per 20kg
Full Pallet 48 x 20kg Bags
MapePave Slurry is a bonding agent to be used in conjunction with MapePave Mortar for the rapid installation of exterior paving including 20mm porcelain.
Advantages:
- Paving slurry ideal for bonding 20mm porcelain.
- BS 7533 compliant.
- Rapid curing – open to pedestrian traffic in 12 hours.
- Just mix with water.
- Thin application.
- Low shrinkage.
- Used in conjunction with MapePave Mortar.
Preparation of the product: Mix a 20 kg bag of MapePave Slurry with 6.4 litres of water for at least 5 minutes with a Mechanical mixer and paddle. The mix must be applied to the MapePave Mortar fresh on fresh and should also be applied to the rear of the installing paver.
Consistency: Powder.
Colour: Grey.
Bulk Density (Kg/m³): 1,500.
Dry Solids Content (%): 100.
Mix Ratio: 6.2 - 6.4 Litres.
Specific Gravity of the Mix (Kg/m³): 2,100.
Mixing Time: 5 to 10 Mins.
Workability of the Mix: 60 Mins.
Open Time: 10 Mins.
Application Temperature Range: From +5°c to +30°c.
Tensile Strength: >1 N/mm2.
Set to Light Foot Traffic: After 12 Hours.
Resistance to Moisture: Excellent.
Resistance to Ageing: Excellent.
Resistance to Solvents and Oils: Excellent.
Resistance to Temperature: From -30°c to +90°c.
Storage & Shelf Life: Mapepave Slurry May Be Stored for Up to 12 Months in Its Original Packaging in a Dry Place.