Ultra Scape Flowpoint Fine Slurry Jointing Mortar 20kg Charcoal Half Pallet (20 Tubs Tail Lift)
20 x 20kg Tub Pallet
Rapid Setting
Fine Finish
Joint widths: 2-50mm
Open to foot traffic: 1 Hour
Colour: Charcoal
Sets in 15 mins at 20°C
Size: 20kg Tub
20 x 20kg Tub Pallet
UltraScape flowpoint fine is a rapid set grout with high fluid consistency for early trafficking that conforms to the strict demands of BS 7533. It is ideal for all paving areas where a rigid or bound void-free joint is required. The product is suitable for application on driveways, patios, town centre pedestrian schemes, pathways and carriageways. UltraScape flowpoint fine can be used with natural stone, concrete flags, Porcelain tiles and clay pavers.
UltraScape flowpoint fine is a fully pre-mixed dry-pack which only requires tile addition of water on-site. It can fill joints from 2mm to 50mm wide with a minimum target depth of 20mm, up to 200mm In one application. This highly fluid grout achieves a final compressive strength of 49.6N/mm’ (results achieved using 3.4 litres of water per 20kg bucket), and will reach its initial set in 30 minutes, will accept light foot traffic after 1 hour, and vehicular traffic after 4 hours (dependent upon temperature).
Joint widths: 2-50mm
Open to foot traffic: 1 hour
Open to vehicular traffic: 4 hours
Just add water
Set time: 15 minutes at 20°C
BS 7533 compliant
For use with all types of paving elements
Available in charcoal & natural grey
20kg buckets
Mixing: 3.4L Per 20kg
Coverage: 600 x 600 x 20mm tiles with a 5mm Joint approx 15m² per 20kg tub
Unit/packaging: 20kg bucket
Storage: Store in a cool, dry and frost-free area at temperatures between 5°C and 30°C
Yield*: 11.12 litres approx, per 20kg bucket
Workability: 5-15 minutes
Shelf life: 8 months from the date of manufacture printed on this bucket, unopened in the above conditions. High temperatures and high humidity will reduce shelf life.
Bond (Adhesion strength): >1.5N/mm² after 28 days
Water required: 3.4 litres per 20kg
Colour: Charcoal
Compressive strength: 49.6N/mm2 after 38 days
Flexural strength: 7.1N/mm² after 28 days
Tensile strength: 3.91N/mm2 after 28 days